One Day My Prints Will Come

I have to try everything once. Sometimes I find things I want to keep doing. Darkroom printing seems to be one such thing.

Perhaps I could have used my holiday to sleep in, but my excitement wouldn't let me. I got up at 5, mixed my chemicals, set up the trays, and grabbed my negatives. I was going to make my very first prints.

I set my first negative in the holder, popped on the enlarger, set the focus, switched off the enlarger and put down the photo paper, exposed for about 15 seconds, and popped it in the developer. Black.... Oops, forgot to turn the aperture down. I was undeterred. I tried another, this time with test strips, and found a good exposure time.

It was pretty cramped in there, but once I got the hang of maneuvering from enlarger to trays to sink the work flow was as difficult as setting up focus in the micro focus finder (which is ridiculously difficult). Nonetheless, I loved it. I lost track of time and spent close to two hours just playing around with the process. There is something magical about watching an image appear in a bath of developer.

Everything came out just a little foggy. I'm not sure how that happened. Could it be a light leak around the door? Could it be the wrong filter? Could it be a chemical issue? There are so many things to learn, and I'm quite excited to soak it up!

All in all the prints came out better than I was expecting. The failures were also much worse than I expected. I didn't realize just how sensitive photographic paper is. It almost makes me want to cut some out and try making paper negatives in my Brownies. I also want to try contact prints with transparencies, like I do with cyanotypes. Not sure if it will work but hey, I gotta try.

Hopefully I'll get a chance to work again soon, my kids want to be able to shower. They want to be clean? 🙄 Oh well, I guess I'll let them.

—————--------------------—————

img_0.0010733370947769002.jpg
S. D. G.

YouTube

Instagram

Facebook

Be sure to add me to your fanbase on Hive Auto so you never miss an Upvote!

Get up to 12 #FREE Fractional Shares valued up to $30,600 by opening & funding a #Webull brokerage account! Use my link to get started!

I'd like to invite you to use Uphold. Create your account and try out one of the easiest and most cost-effective trading experiences. You can pay fiat for crypto just by connecting a bank account and depositing directly into your account. Not only that but if you get the Uphold card you can pay with crypto anywhere that Mastercard is accepted!
https://uphold.com/signup?referral=c9cdfce131

Check out my nfts for sale on NFT Showroom!

Would you like to get paid in crypto for searching the internet? Try using and signing up for Presearch to earn some great crypto! I've currently got 26.23PRE tokens, with a market value of $6.24. It’s no fortune, but when you search using sites like Google you get paid $0.
Join Presearch to break Google's stranglehold on internet searches!!!

Get 25 PRE just for signing up!

I'm now a Xero Shoes affiliate, click here to find the best barefoot shoes available!



0
0
0.000
8 comments
avatar

Real pleasure reading this! :)
I know that feeling, standing in the dark room, waiting for the image to slowly appear...
Your kids may be a bit upset for a moment or two (or an hour or two, lmao) but they will have portraits like nobody else does! :)

!PIZZA
!PGM

avatar

Sent 0.1 PGM - 0.1 LVL- 1 STARBITS - 0.05 DEC - 1 SBT - 0.1 THG - 0.000001 SQM - 0.1 BUDS - 0.01 WOO tokens

remaining commands 2

BUY AND STAKE THE PGM TO SEND A LOT OF TOKENS!

The tokens that the command sends are: 0.1 PGM-0.1 LVL-0.1 THGAMING-0.05 DEC-15 SBT-1 STARBITS-[0.00000001 BTC (SWAP.BTC) only if you have 2500 PGM in stake or more ]

5000 PGM IN STAKE = 2x rewards!

image.png
Discord image.png

Support the curation account @ pgm-curator with a delegation 10 HP - 50 HP - 100 HP - 500 HP - 1000 HP

Get potential votes from @ pgm-curator by paying in PGM, here is a guide

I'm a bot, if you want a hand ask @ zottone444


avatar

I at least leave the toilet accessible for the kids, but only between prints 🤣

I need a timer for the developer, from what I have read the "fogging" is either from underdevelopment or my safelight. I am pretty sure it's development time since I'm impatient and probably took them out after only 30 seconds!

avatar
(Edited)

I at least leave the toilet accessible for the kids, but only between prints

That's wise, I guess, otherwise sooner or later they'll start hating what you do :D

For a timer I use the clock app on my Android phone, it has an alarm that could bring back a dead man if I don't turn the volume down :D

Honestly, I envy you a bit, I miss so much that whole process of mixing chemicals, setting the enlarger, waiting for the development, wondering what do to better, etc...

!PIZZA

avatar

Won't the clock app make too much light?

avatar

Mine doesn't turn on the flash on the back and I put it with the screen down so when it's on some fabric I barely see its light.